PVC Foam Board

Cold-Weather Brittleness in PVC Sheet — Why a July Sheet Cracks in January

Impact toughness stops working below a temperature set by the modifier system. Why summer-tested sheets fail in winter, and what to specify for a cold market.

Thickness Tolerance on PVC Sheet — What ±0.2 mm Means on a Running Line | YUP...

Why a thickness tolerance needs a measuring method, how foam board readings shift with the gauge, and why a sheet running thick is a defect rather than a bonus.

Calendering or Extrusion? The PVC Sheet Process Choice Nobody Puts on a Quote

Calendered vs extruded PVC sheet: why every mechanical value comes in two columns, which route suits which thickness, and why orientation costs a quarter of your strength.

Why PVC Sheet Warps — and Why the Resin Is Almost Never the Cause | YUPSENI

PVC sheet warps when stress becomes visible. Unequal skins, container heat, bad storage, restrained expansion and machining all cause it. How to diagnose which.

Skin and Core — Why Two PVC Boards at the Same Density Print Differently

A foam board has dense skins and an expanded core. Density averages both, printing touches one. Why screw holding, stiffness and print results vary at the same figure.

Density Is Not Strength — What 0.45, 0.55 and 0.70 g/cm³ Buy You in a PVC Sheet

A target density can be reached with less resin or more filler, and the two routes push the number in opposite directions. How to read a PVC foam board density grade.

Recycled Content in PVC Sheet — Four Field Checks Before You Trust the Claim

Why recycled PVC behaves differently from recycled PET, and four checks you can run without a lab: cut edge, UV torch, oven test and matched-strip flex.

Lead or Calcium-Zinc? The PVC Stabiliser Choice That Decides Which Markets Yo...

PVC stabilisers decide market access before they decide performance. How lead, calcium-zinc and organotin differ, and the paperwork that proves which one you bought.

What Is Actually in a PVC Sheet

A PVC sheet is a formulation, not a material. How resin K-value, stabiliser type, calcium carbonate loading and foaming agent decide how long your sheet lasts.

What are the main applications of PVC foam board? Can it be used for ceilings...

Products Description Yes. PVC foam board (also called PVC forex board, celuka board) is a versatile rigid foam material. It can definitely be used for ceilings and wall panels , and these are two of its most common applications. Main applications of PVC foam b

What thickness and density are recommended for ceiling and wall panel applica...

Products Description Typical recommendations for YUPSENI PVC foam board used as ceiling and wall panels: Short answer For normal indoor ceilings: 5 mm, 0.5–0.6 g/cm³ For indoor wall panels: 5–8 mm, 0.55–0.7 g/cm³ Notes: Thinner than

How to Test PVC Foam Board Density Without Cutting It

Learn 4 non-destructive ways to test PVC foam board density: measure & weigh, float test, known-size weight trick, and touch check. Compare results to spec.