How to maintain PVC foam board

PVC foam board is made of PVC as raw material. It accounts for a large proportion of the building materials industry, followed by the packaging industry, and several other industries with small-scale applications. So, how to maintain the PVC board? I believe it is what many people want to know. details as follows:

1. Routine maintenance: use 90% dry mop to clean the PVC board, do not use local cleaning, because the pollution of local cleaning is serious;

2. Monthly maintenance: Wax the surface of the partially damaged board. Especially the homogeneous PVC board is usually waxed once a month;

3. Pollution treatment: ink, food. Greasy PVC boards should be wiped with dirt, and then scrub the traces with diluted detergent. The remaining traces of black leather shoes are difficult to remove. They can be scrubbed with a veil, and cannot be poured on the PVC board for cleaning. After scrubbing, add wax for maintenance;

4. Precautions: PVC boards cannot be scratched with cleaning balls or knives. Clean dirt regularly. Consult relevant personnel, do not use acetone, toluene, and other chemicals indiscriminately;

5. Chemical protection: Avoid a large amount of water staying on the surface of the PVC board for a long time. Water soaking the floor for a long time may penetrate under the PVC board, causing the gel-solubility of the PVC board to lose its adhesion, and may also cause the layer of protective wax on the surface of the PVC board to cause PVC board Pollution, or sewage seeps into the PVC board, causing discoloration of the PVC board;

6. Sun protection: avoid direct sunlight, and do a good job of ultraviolet radiation of PVC board to prevent PVC board from fading.