Ps Wall Panel For Residential

A: 500 sqm per design and color. For stock designs in regular production, trial orders of 200–300 sqm can sometimes be accommodated depending on the production schedule. Custom patterns and colors require the full MOQ because the extrusion line must be set up specifically for that run, and the setup time is the same whether you order 100 sqm or 1,000 sqm. If you are testing a new market, ask about current stock designs that ship at lower minimums.

A: Yes. Polystyrene is a closed-cell polymer-it does not absorb water, does not swell, and does not provide a food source for mold or mildew. Seal panel joints and perimeter edges with a quality silicone sealant to prevent water from reaching the substrate behind the panels. For shower enclosures where panels face direct water spray, use mechanical fasteners in addition to adhesive, and specify HIPS (high-impact polystyrene) for the additional toughness the application demands.

A: PS is lighter-roughly 30–40% lower weight per square meter-which translates directly to lower freight cost per container. It also provides measurably better thermal insulation because the polystyrene cellular structure traps more still air. PVC is mechanically tougher and easier to formulate to UL 94 V-0 fire rating. For most residential and commercial interior applications where fire code does not mandate V-0, PS panels deliver the better value proposition. For projects requiring V-0, consult our team about PVC alternatives. See our full PS vs PVC comparison guide.

A: Each panel stack is wrapped in PE film, then packed in reinforced export-grade corrugated cartons with edge protectors on all four corners. Cartons are palletized on fumigated ISPM 15 timber pallets and strapped. Panels are packed face-to-face with a protective interleaf sheet between each pair to prevent surface scuffing during transit. Mixed-container consolidation is available-you can combine PS wall panels with SPC flooring, PVC ceiling boards, or PVC foam boards in a single container to optimize freight cost per cubic meter.

A: Yes. Every export order includes a printed installation guide in English and a product datasheet covering dimensional tolerances, fire rating classification, material safety data, and storage recommendations. The installation guide covers substrate preparation, adhesive selection by substrate type, joint treatment, and cutting and trimming instructions. Branded versions with your company logo and contact information are available for distributors who want to provide documentation under their own brand.

A: Yes, for qualified buyers. Standard evaluation samples are 150 × 150 mm swatches showing surface finish, edge profile, and color. Larger format samples up to 300 × 300 mm are available on request for projects where you need to present to a client or test a specific installation detail. Courier shipping cost on the first sample shipment is credited against your first container order. Contact YUPSENI with your requirements and shipping address.