SPC 3.5 mm Vinyl Flooring

SPC 3.5 mm Vinyl Flooring

SPC 3.5 mm Vinyl flooring is the latest LVP luxury vinyl/luxury vinyl tile LVT flooring product.SPC vinyl flooring with a rigid center allow for increased durability and better stability.

  • Fast Delievery
  • Quality Assurance
  • 24/7 Customer Service
Product Introduction
Products Description

 

High Quality SPC Flooring is specifically composed of the following materials:

The main structure of the SPC 3.5 mm vinyl flooring is a UV coating layer, transparent wear-resistant layer, printing decorative layer, SPC vinyl base (SPC core), and cork or EVA base.

 

 

SPC 3.5 mm Vinyl flooring installation precautions

 

 

1. Flatness: The paving of SPC floor requires a higher level of flatness of the sub floor. Often the flatness of the sub floor directly determines whether the SPC floor can be used. Therefore, when deciding to use the SPC floor, the original ground must be leveling (terrazzo, ceramic tiles, floor paint, etc. can be laid directly), Sub floor should be flat within a tolerance of 3mm per 2 meter , otherwise, self-leveling cement should be used for leveling.
2. Indoor temperature: SPC 3.5 mm Vinyl flooring is suitable for indoor environment, not suitable for outdoor environment where exposed to sunlight and driving. After the floor arrives at the site, it should be left unpacked for 24-48 hours to acclimate to let the thermal expansion and contraction rate of the floor same as the new environment. The room temperature should be controlled between 18-29 degrees Celsius to avoid sun exposure before installation.
3. Underlayment : It is recommended to use 1.0mm underlayment, and it is forbidden to use underlayment over 2.0mm. Especially for SPC 3.5 mm Vinyl flooring with a thickness of 3.5MM-4MM,if the sub floor uneven, underlayment too thick, which can easily cause the click to break and trip.

product-1000-688

 

4. Installation: Install the short side first and then the long side when the thickness is below 4.0MM, and install the long side first and then the short side when installing the SPC floor with thickness above 4.0MM. Allow a minimum 8-10MM gap between SPC floor and wall for spc floor expansion. If the room is particularly long and wide, the gap should be widened accordingly or T-molding should be used as partitions if the length or width greater than 10 meter. Insufficient reserved gap can easily cause floor arching and tile-like deformation. The SPC floor should be staggered, and the short end joints between the floors should be staggered more than 300mm, so that the floor will be more stable, beautiful and durable.
 

SPC4

product-1452-619

5. Cutting: SPC floor with thickness below 4.0mm can be directly used with a paper cutter. SPC floor with thickness above 4.0mm is recommended to use a dust-free saw.
6, Maintenance: SPC floor does not need special maintenance, regular cleaning is enough. Avoid exposure to direct sunlight for prolonged periods of time. Do not roll or drag heavy objects across your floor. Do not polish or wax or steam clean the floor.
7. Since such SPC 3.5 mm Vinyl flooring itself is a waterproof floor, there is no need to do waterproof processing.

 

Hot Tags: spc 3.5 mm vinyl flooring, China, manufacturers, factory, customized, wholesale, free sample, supreme quality spc flooring, spc board flooring, spc vinyl plank flooring lowes, spc vinyl flooring waterproof, stone polymer composite flooring, white spc flooring

You Might Also Like

(0/10)

clearall